Residents urged to report issues after overspill at treatment works

West Lothian residents are being urged to report any issues regarding overspill from local water treatment works to Scottish Water.

Monday, 22nd March 2021, 2:45 pm
Updated Monday, 22nd March 2021, 5:16 pm
Executive councillor for the environment Tom Conn

Recent heavy rains meant the overflow chambers – which are regulated and act as a relief point on the water network during storm events – operated at both the Blackburn and East Calder Waste Water Treatment Works. Both sites are run by Veolia on behalf of Scottish Water.

Although the chambers at both works are fitted with screens, such was the volume of material flushed through the network, some debris ended up spilling into the River Almond, leaving some material along the side of the banks.When the sewer system is operating normally, waste water gets taken to treatment works, where it is cleaned, treated and returned safely to watercourses and the sea.

During heavy rainfall storms, more water is getting into these pipes than they can cope with, so they have been designed with a relief mechanism to safely relieve the pressure on the network.

Storm water is released by an overflow pipe, which spills at designated points, into watercourses or the sea.

Following an inspection Scottish Water has organised for the area downstream from the East Calder works to be checked and cleared.

Anyone with who is aware of any issues connected to a treatment works should raise it directly via Pollution/Sewage-Pollution-Form.

Executive councillor for the environment Tom Conn said: “The council is aware of issues with debris in the River Almond related to the Blackburn and East Calder works.

“We understand the concern this causes among local residents and have been in contact with Scottish Water. While SEPA is responsible for rivers, we would encourage anyone who notices any issues around the works to raise them directly with Scottish Water so they can investigate.“West Lothian residents can play their part in preventing treatment tanks becoming blocked. Flushing incorrect items – such as wipes, cotton wool and sanitary products – can be a major factor in reducing the capacity at water treatment works, leading to issues like this.”